# 2.4: Measures of Central Tendency- Mean, Median and Mode

- Last updated

- Save as PDF

- Page ID
- 28338

The "center" of a data set is also a way of describing location. The two most widely used measures of the "center" of the data are the **mean** (average) and the median. To calculate the **mean weight** of 50 people, add the 50 weights together and divide by 50. To find the **median weight** of the 50 people, order the data and find the number that splits the data into two equal parts. The median is generally a better measure of the center when there are extreme values or outliers because it is not affected by the precise numerical values of the outliers. The mean is the most common measure of the center.

The words “mean” and “average” are often used interchangeably. The substitution of one word for the other is common practice. The technical term is “arithmetic mean” and “average” is technically a center location. However, in practice among non-statisticians, “average" is commonly accepted for “arithmetic mean.”

When each value in the data set is not unique, the mean can be calculated by multiplying each distinct value by its frequency and then dividing the sum by the total number of data values. The letter used to represent the sample mean is an \(x\) with a bar over it (pronounced “\(x\) bar”): \(\overline{x}\).

The Greek letter \(\mu\) (pronounced "mew") represents the **population mean**. One of the requirements for the **sample mean** to be a good estimate of the **population mean** is for the sample taken to be truly random.

To see that both ways of calculating the mean are the same, consider the sample:

1; 1; 1; 2; 2; 3; 4; 4; 4; 4; 4

\[\bar{x} = \dfrac{1+1+1+2+2+3+4+4+4+4+4}{11} = 2.7\]

In the second calculation, the frequencies are 3, 2, 1, and 5.

You can quickly find the location of the median by using the expression

\[\dfrac{n+1}{2}\]

The letter \(n\) is the total number of data values in the sample. If \(n\) is an odd number, the median is the middle value of the ordered data (ordered smallest to largest). If \(n\) is an even number, the median is equal to the two middle values added together and divided by two after the data has been ordered. For example, if the total number of data values is 97, then

\[\dfrac{n+1}{2} = \dfrac{97+1}{2} = 49.\]

The median is the 49^{th} value in the ordered data. If the total number of data values is 100, then

\[\dfrac{n+1}{2} = \dfrac{100+1}{2} = 50.5.\]

The median occurs midway between the 50^{th} and 51^{st} values. The location of the median and the value of the median are **not** the same. The upper case letter \(M\) is often used to represent the median. The next example illustrates the location of the median and the value of the median.

Example \(\PageIndex{1}\)

AIDS data indicating the number of months a patient with AIDS lives after taking a new antibody drug are as follows (smallest to largest):

3; 4; 8; 8; 10; 11; 12; 13; 14; 15; 15; 16; 16; 17; 17; 18; 21; 22; 22; 24; 24; 25; 26; 26; 27; 27; 29; 29; 31; 32; 33; 33; 34; 34; 35; 37; 40; 44; 44; 47

Calculate the mean and the median.

**Answer**

The calculation for the mean is:

\[\bar{x} = \dfrac{[3+4+(8)(2)+10+11+12+13+14+(15)(2)+(16)(2)+...+35+37+40+(44)(2)+47]}{40} = 23.6\]

To find the median, \(M\), first use the formula for the location. The location is:\[\dfrac{n+1}{2} = \dfrac{40+1}{2} = 20.5\]

Starting at the smallest value, the median is located between the 20^{th} and 21^{st} values (the two 24s):

3; 4; 8; 8; 10; 11; 12; 13; 14; 15; 15; 16; 16; 17; 17; 18; 21; 22; 22; 24; 24; 25; 26; 26; 27; 27; 29; 29; 31; 32; 33; 33; 34; 34; 35; 37; 40; 44; 44; 47

\[M = \dfrac{24+24}{2} = 24\]

Example \(\PageIndex{2}\)

Suppose that in a small town of 50 people, one person earns $5,000,000 per year and the other 49 each earn $30,000. Which is the better measure of the "center": the mean or the median?

**Solution**

\[\bar{x} = \dfrac{5,000,000+49(30,000)}{50} = 129,400\]

\(M = 30,000\)

(There are 49 people who earn $30,000 and one person who earns $5,000,000.)

The median is a better measure of the "center" than the mean because 49 of the values are 30,000 and one is 5,000,000. The 5,000,000 is an outlier. The 30,000 gives us a better sense of the middle of the data.

Another measure of the center is the mode. The **mode **is the most frequent value. There can be more than one mode in a data set as long as those values have the same frequency and that frequency is the highest. A data set with two modes is called bimodal.

Example \(\PageIndex{3}\)

Statistics exam scores for 20 students are as follows:

50; 53; 59; 59; 63; 63; 72; 72; 72; 72; 72; 76; 78; 81; 83; 84; 84; 84; 90; 93

Find the mode.

**Answer**

The most frequent score is 72, which occurs five times. Mode = 72.= 7.

Example \(\PageIndex{4}\)

Five real estate exam scores are 430, 430, 480, 480, 495. The data set is bimodal because the scores 430 and 480 each occur twice.

When is the mode the best measure of the "center"? Consider a weight loss program that advertises a mean weight loss of six pounds the first week of the program. The mode might indicate that most people lose two pounds the first week, making the program less appealing.

The mode can be calculated for qualitative data as well as for quantitative data. For example, if the data set is: red, red, red, green, green, yellow, purple, black, blue, the mode is red.

Statistical software will easily calculate the mean, the median, and the mode. Some graphing calculators can also make these calculations. In the real world, people make these calculations using software.

The Law of Large Numbers and the Mean

The Law of Large Numbers says that if you take samples of larger and larger size from any population, then the mean \(\bar{x}\) of the sample is very likely to get closer and closer to \(\mu\). This is discussed in more detail later in the text.

## Sampling Distributions and Statistic of a Sampling Distribution

You can think of a sampling distribution as a **relative frequency distribution** with a great many samples. (See **Sampling and Data** for a review of relative frequency). Suppose thirty randomly selected students were asked the number of movies they watched the previous week. The results are in the **relative frequency table** shown below.

# of movies |
Relative Frequency |
---|---|

0 |
\(\dfrac{5}{30}\) |

1 |
\(\dfrac{15}{30}\) |

2 |
\(\dfrac{6}{30}\) |

3 |
\(\dfrac{3}{30}\) |

4 |
\(\dfrac{1}{30}\) |

**If you let the number of samples get very large (say, 300 million or more), the relative frequency table becomes a relative frequency distribution**.

A statistic is a number calculated from a sample. Statistic examples include the mean, the median and the mode as well as others. The sample mean \(\bar{x}\) is an example of a statistic which estimates the population mean \(\mu\).

## Calculating the Mean of Grouped Frequency Tables

When only grouped data is available, you do not know the individual data values (we only know intervals and interval frequencies); therefore, you cannot compute an exact mean for the data set. What we must do is estimate the actual mean by calculating the mean of a frequency table. A frequency table is a data representation in which grouped data is displayed along with the corresponding frequencies. To calculate the mean from a grouped frequency table we can apply the basic definition of mean:

\[mean = \dfrac{\text{data sum}}{\text{number of data values}}.\]

We simply need to modify the definition to fit within the restrictions of a frequency table.

Since we do not know the individual data values we can instead find the midpoint of each interval. The midpoint is

\[\dfrac{\text{lower boundary+upper boundary}}{2}.\]

We can now modify the mean definition to be

\[\text{Mean of Frequency Table} = \dfrac{\sum{fm}}{\sum{f}}\]

where \(f\) is the frequency of the interval and \(m \) is the midpoint of the interval.

Example \(\PageIndex{5}\)

A frequency table displaying professor Blount’s last statistic test is shown. Find the best estimate of the class mean.

Grade Interval |
Number of Students |
---|---|

50–56.5 | 1 |

56.5–62.5 | 0 |

62.5–68.5 | 4 |

68.5–74.5 | 4 |

74.5–80.5 | 2 |

80.5–86.5 | 3 |

86.5–92.5 | 4 |

92.5–98.5 | 1 |

**Solution**

- Find the midpoints for all intervals

Grade Interval |
Midpoint |
---|---|

50–56.5 | 53.25 |

56.5–62.5 | 59.5 |

62.5–68.5 | 65.5 |

68.5–74.5 | 71.5 |

74.5–80.5 | 77.5 |

80.5–86.5 | 83.5 |

86.5–92.5 | 89.5 |

92.5–98.5 | 95.5 |

- Calculate the sum of the product of each interval frequency and midpoint. \(\sum{fm} 53.25(1) + 59.5(0) + 65.5(4 )+ 71.5(4) + 77.5(2) + 83.5(3) + 89.5(4) + 95.5(1) = 1460.25\)
- \(\mu = \dfrac{\sum{fm}}{\sum{f}} = \dfrac{1460.25}{19} = 76.86\)

## WeBWorK Problems

Query \(\PageIndex{1}\)

Query \(\PageIndex{2}\)

Query \(\PageIndex{3}\)

Query \(\PageIndex{4}\)

Query \(\PageIndex{5}\)

Query \(\PageIndex{6}\)

Query \(\PageIndex{7}\)

### References

- Data from The World Bank, available online at http://www.worldbank.org (accessed April 3, 2013).
- “Demographics: Obesity – adult prevalence rate.” Indexmundi. Available online at http://www.indexmundi.com/g/r.aspx?t=50&v=2228&l=en (accessed April 3, 2013).

### Review

The mean and the median can be calculated to help you find the "center" of a data set. The mean is the best estimate for the actual data set, but the median is the best measurement when a data set contains several outliers or extreme values. The mode will tell you the most frequently occuring datum (or data) in your data set. The mean, median, and mode are extremely helpful when you need to analyze your data, but if your data set consists of ranges which lack specific values, the mean may seem impossible to calculate. However, the mean can be approximated if you add the lower boundary with the upper boundary and divide by two to find the midpoint of each interval. Multiply each midpoint by the number of values found in the corresponding range. Divide the sum of these values by the total number of data values in the set.

### Formula Review

\[\mu = \dfrac{\sum{fm}}{\sum{f}} \]

where \(f\) = interval frequencies and \(m\) = interval midpoints.

## Glossary

- Frequency Table
- a data representation in which grouped data is displayed along with the corresponding frequencies
- Mean
- a number that measures the central tendency of the data; a common name for mean is 'average.' The term 'mean' is a shortened form of 'arithmetic mean.' By definition, the mean for a sample (denoted by \(\bar{x}\)) is \(\bar{x} = \dfrac{\text{Sum of all values in the sample}}{\text{Number of values in the sample}}\), and the mean for a population (denoted by \(\mu\)) is \(\mu = \dfrac{\text{Sum of all values in the population}}{\text{Number of values in the population}}\).
- Median
- a number that separates ordered data into halves; half the values are the same number or smaller than the median and half the values are the same number or larger than the median. The median may or may not be part of the data.
- Midpoint
- the mean of an interval in a frequency table
- Mode
- the value that appears most frequently in a set of data

## Contributors and Attributions

Barbara Illowsky and Susan Dean (De Anza College) with many other contributing authors. Content produced by OpenStax College is licensed under a Creative Commons Attribution License 4.0 license. Download for free at http://cnx.org/contents/30189442-699...b91b9de@18.114.