# 2.4: Box Plots


Box plots (also called box-and-whisker plots or box-whisker plots) give a good graphical image of the concentration of the data. They also show how far the extreme values are from most of the data. A box plot is constructed from five values: the minimum value, the first quartile (Q1), the median (Q2), the third quartile (Q3), and the maximum value. We use these values to compare how close other data values are to them.

To construct a box plot, use a horizontal or vertical number line and a rectangular box. The smallest and largest data values label the endpoints of the axis. The first quartile marks one end of the box and the third quartile marks the other end of the box. Approximately the middle 50 percent of the data fall inside the box. The “whiskers” extend from the ends of the box to the smallest and largest data values. The median or second quartile can be between the first and third quartiles, or it can be one, or the other, or both. The box plot gives a good, quick picture of the data.

#### Note:

You may encounter box-and-whisker plots that have dots marking outlier values. In those cases, the whiskers are not extending to the minimum and maximum values.

Consider, again, this dataset.

1 1 2 2 4 6 6.8 7.2 8 8.3 9 10 10 11.5

The first quartile, Q1 is 2.
The median, Q2 is 7.
The third quartile, Q3 is 9.
The smallest value is 1.
The largest value is 11.5.

The following image shows the constructed box plot.

The two whiskers extend from the first quartile to the smallest value and from the third quartile to the largest value. The median is shown with a dashed line.

#### Note:

It is important to start a box plot with a scaled number line. Otherwise the box plot may not be useful.

## Example 1

The following data are the heights of 40 students in a statistics class.

59 60 61 62 62 63 63 64 64 64 65 65 65 65 65 65 65 65 65 66 66 67 67 68 68 69 70 70 70 70 70 71 71 72 72 73 74 74 75 77

Construct a box plot with the following properties; the calculator instructions for the minimum and maximum values as well as the quartiles follow the example.

• Minimum value = 59
• Maximum value = 77
• Q1, First quartile = 64.5
• Q2, Second quartile or median= 66
• Q3, Third quartile = 70

1. Each quarter has approximately 25% of the data.
2. The spreads of the four quarters are 64.5 – 59 = 5.5 (first quarter), 66 – 64.5 = 1.5 (second quarter), 70 – 66 = 4 (third quarter), and 77 – 70 = 7 (fourth quarter). So, the second quarter has the smallest spread and the fourth quarter has the largest spread.
3. Range = maximum value – the minimum value = 77 – 59 = 18
4. Interquartile Range: IQR = Q3 – Q1 = 70 – 64.5 = 5.5.
5. The interval 59–65 has more than 25% of the data so it has more data in it than the interval 66 through 70 which has 25% of the data.
6. The middle 50% (middle half) of the data has a range of 5.5 inches.

To find the minimum, maximum, and quartiles:

• Enter data into the list editor (Pres STAT 1:EDIT). If you need to clear the list, arrow up to the name L1, press CLEAR, and then arrow down.
• Put the data values into the list L1.
• Press STAT and arrow to CALC. Press 1:1-VarStats. Enter L1.
• Press ENTER.
• Use the down and up arrow keys to scroll.
Smallest value = 59.
Largest value = 77.
Q1: First quartile = 64.5.
Q2: Second quartile or median = 66.
Q3: Third quartile = 70.

To construct the box plot:

• Press 4:Plotsoff. Press ENTER.
• Arrow down and then use the right arrow key to go to the fifth picture, which is the box plot. Press ENTER.
• Arrow down to Xlist: Press 2nd 1 for L1
• Arrow down to Freq: Press ALPHA. Press 1.
• Press Zoom. Press 9: ZoomStat.
• Press TRACE, and use the arrow keys to examine the box plot.

### Try It

The following data are the number of pages in 40 books on a shelf.

136 140 178 190 205 215 217 218 232 234 240 255 270 275 290 301 303 315 317 318 326 333 343 349 360 369 377 388 391 392 398 400 402 405 408 422 429 450 475 512

Construct a box plot using a graphing calculator, and state the interquartile range.

IQR = 158

This video explains what descriptive statistics are needed to create a box and whisker plot.

A YouTube element has been excluded from this version of the text. You can view it online here: http://pb.libretexts.org/esm/?p=48

For some sets of data, some of the largest value, smallest value, first quartile, median, and third quartile may be the same. For instance, you might have a data set in which the median and the third quartile are the same. In this case, the diagram would not have a dotted line inside the box displaying the median. The right side of the box would display both the third quartile and the median. For example, if the smallest value and the first quartile were both one, the median and the third quartile were both five, and the largest value was seven, the box plot would look like:

In this case, at least 25% of the values are equal to one. 25% of the values are between one and five, inclusive.
At least 25% of the values are equal to five. The top 25% of the values fall between five and seven, inclusive.

## Example 2

Test scores for a college statistics class held during the day are:

99 56 78 55.5 32 90 80 81 56 59 45 77 84.5 84 70 72 68 32 79 90

Test scores for a college statistics class held during the evening are:

98 78 68 83 81 89 88 76 65 45 98 90 80 84.5 85 79 78 98 90 79 81 25.5

1. Find the smallest and largest values, the median, and the first and third quartile for the day class.
Min = 32
Q1 = 56
Q2 = 74.5
Q3 = 82.5
2. Find the smallest and largest values, the median, and the first and third quartile for the night class.
Min = 25.5
Q1 = 78
Q2 = 81
Q3 = 89
3. Create a box plot for each set of data. Use one number line for both box plots.
4. Which box plot has the widest spread for the middle 50% of the data (the data between the first and third quartiles)? What does this mean for that set of data in comparison to the other set of data?
[hidden-answer a=”513915″]The first data set has the wider spread for the middle 50% of the data. The IQR for the first data set is greater than the IQR for the second set. This means that there is more variability in the middle 50% of the first data set.[/hidden-answer]

### Try It

The following data set shows the heights in inches for the boys in a class of 40 students.

66; 66; 67; 67; 68; 68; 68; 68; 68; 69; 69; 69; 70; 71; 72; 72; 72; 73; 73; 74

The following data set shows the heights in inches for the girls in a class of 40 students.

61; 61; 62; 62; 63; 63; 63; 65; 65; 65; 66; 66; 66; 67; 68; 68; 68; 69; 69; 69

Construct a box plot using a graphing calculator for each data set, and state which box plot has the wider spread for the middle 50% of the data.

IQR for the boys = 4

IQR for the girls = 5

The box plot for the heights of the girls has the wider spread for the middle 50% of the data.

## Example 3

Graph a box-and-whisker plot for the data values shown.

10 10 10 15 35 75 90 95 100 175 420 490 515 515 790

The five numbers used to create a box-and-whisker plot are:

• Min: 10
• Q1: 15
• Med: 95
• Q3: 490
• Max: 790

The following graph shows the box-and-whisker plot.

### Try It

Graph a box-and-whisker plot for the data values shown.

0 5 5 15 30 30 45 50 50 60 75 110 140 240 330
[hidden-answer a=”49081″]The data are in order from least to greatest. There are 15 values, so the eighth number in order is the median: 50. There are seven data values written to the left of the median and 7 values to the right. The five values that are used to create the boxplot are:

• Min: 0
• Q1: 15
• Med: 50
• Q3: 110
• Max: 330

## References

Data from West Magazine.

## Concept Review

Box plots are a type of graph that can help visually organize data. To graph a box plot the following data points must be calculated: the minimum value, the first quartile, the median, the third quartile, and the maximum value. Once the box plot is graphed, you can display and compare distributions of data.