2.1: Display Data
 Page ID
 4547
StemandLeaf Graphs (Stemplots), Line Graphs, and Bar Graphs
One simple graph, the stemandleaf graph or stemplot, comes from the field of exploratory data analysis. It is a good choice when the data sets are small. To create the plot, divide each observation of data into a stem and a leaf. The leaf consists of a final significant digit. For example, 23 has stem two and leaf three. The number 432 has stem 43 and leaf two. Likewise, the number 5,432 has stem 543 and leaf two. The decimal 9.3 has stem nine and leaf three. Write the stems in a vertical line from smallest to largest. Draw a vertical line to the right of the stems. Then write the leaves in increasing order next to their corresponding stem.
Example \(\PageIndex{2}\).1
For Susan Dean's spring precalculus class, scores for the first exam were as follows (smallest to largest):
33; 42; 49; 49; 53; 55; 55; 61; 63; 67; 68; 68; 69; 69; 72; 73; 74; 78; 80; 83; 88; 88; 88; 90; 92; 94; 94; 94; 94; 96; 100
Stem  Leaf 

3  3 
4  2 9 9 
5  3 5 5 
6  1 3 7 8 8 9 9 
7  2 3 4 8 
8  0 3 8 8 8 
9  0 2 4 4 4 4 6 
10  0 
The stemplot shows that most scores fell in the 60s, 70s, 80s, and 90s. Eight out of the 31 scores or approximately 26% (831)(831) were in the 90s or 100, a fairly high number of As.
Exercise \(\PageIndex{2}\).1
For the Park City basketball team, scores for the last 30 games were as follows (smallest to largest):
32; 32; 33; 34; 38; 40; 42; 42; 43; 44; 46; 47; 47; 48; 48; 48; 49; 50; 50; 51; 52; 52; 52; 53; 54; 56; 57; 57; 60; 61
Construct a stem plot for the data.
The stemplot is a quick way to graph data and gives an exact picture of the data. You want to look for an overall pattern and any outliers. An outlier is an observation of data that does not fit the rest of the data. It is sometimes called an extreme value. When you graph an outlier, it will appear not to fit the pattern of the graph. Some outliers are due to mistakes (for example, writing down 50 instead of 500) while others may indicate that something unusual is happening. It takes some background information to explain outliers, so we will cover them in more detail later.
Example \(\PageIndex{2}\).2
The data are the distances (in kilometers) from a home to local supermarkets. Create a stemplot using the data:
1.1; 1.5; 2.3; 2.5; 2.7; 3.2; 3.3; 3.3; 3.5; 3.8; 4.0; 4.2; 4.5; 4.5; 4.7; 4.8; 5.5; 5.6; 6.5; 6.7; 12.3
Do the data seem to have any concentration of values?
NOTE
The leaves are to the right of the decimal.
 Answer

The value 12.3 may be an outlier. Values appear to concentrate at three and four kilometers.
Stem Leaf 1 1 5 2 3 5 7 3 2 3 3 5 8 4 0 2 5 5 7 8 5 5 6 6 5 7 7 8 9 10 11 12 3 Table \(\PageIndex{2}\).2
Exercise \(\PageIndex{2}\).2
The following data show the distances (in miles) from the homes of offcampus statistics students to the college. Create a stem plot using the data and identify any outliers:
0.5; 0.7; 1.1; 1.2; 1.2; 1.3; 1.3; 1.5; 1.5; 1.7; 1.7; 1.8; 1.9; 2.0; 2.2; 2.5; 2.6; 2.8; 2.8; 2.8; 3.5; 3.8; 4.4; 4.8; 4.9; 5.2; 5.5; 5.7; 5.8; 8.0
Example \(\PageIndex{2}\).3
A sidebyside stemandleaf plot allows a comparison of the two data sets in two columns. In a sidebyside stemandleaf plot, two sets of leaves share the same stem. The leaves are to the left and the right of the stems. Table \(\PageIndex{2}\).4 and Table \(\PageIndex{2}\).5 show the ages of presidents at their inauguration and at their death. Construct a sidebyside stemandleaf plot using this data.
 Answer

Ages at Inauguration Ages at Death 9 9 8 7 7 7 6 3 2 4 6 9 8 7 7 7 7 6 6 6 5 5 5 5 4 4 4 4 4 2 2 1 1 1 1 1 0 5 3 6 6 7 7 8 9 8 5 4 4 2 1 1 1 0 6 0 0 3 3 4 4 5 6 7 7 7 8 7 0 0 1 1 1 4 7 8 8 9 8 0 1 3 5 8 9 0 0 3 3 Table \(\PageIndex{2}\).3
President  Age  President  Age  President  Age 

Washington  57  Lincoln  52  Hoover  54 
J. Adams  61  A. Johnson  56  F. Roosevelt  51 
Jefferson  57  Grant  46  Truman  60 
Madison  57  Hayes  54  Eisenhower  62 
Monroe  58  Garfield  49  Kennedy  43 
J. Q. Adams  57  Arthur  51  L. Johnson  55 
Jackson  61  Cleveland  47  Nixon  56 
Van Buren  54  B. Harrison  55  Ford  61 
W. H. Harrison  68  Cleveland  55  Carter  52 
Tyler  51  McKinley  54  Reagan  69 
Polk  49  T. Roosevelt  42  G.H.W. Bush  64 
Taylor  64  Taft  51  Clinton  47 
Fillmore  50  Wilson  56  G. W. Bush  54 
Pierce  48  Harding  55  Obama  47 
Buchanan  65  Coolidge  51  Trump  70 
President  Age  President  Age  President  Age 

Washington  67  Lincoln  56  Hoover  90 
J. Adams  90  A. Johnson  66  F. Roosevelt  63 
Jefferson  83  Grant  63  Truman  88 
Madison  85  Hayes  70  Eisenhower  78 
Monroe  73  Garfield  49  Kennedy  46 
J. Q. Adams  80  Arthur  56  L. Johnson  64 
Jackson  78  Cleveland  71  Nixon  81 
Van Buren  79  B. Harrison  67  Ford  93 
W. H. Harrison  68  Cleveland  71  Reagan  93 
Tyler  71  McKinley  58  
Polk  53  T. Roosevelt  60  
Taylor  65  Taft  72  
Fillmore  74  Wilson  67  
Pierce  64  Harding  57  
Buchanan  77  Coolidge  60 
Another type of graph that is useful for specific data values is a line graph. In the particular line graph shown in Example \(\PageIndex{4}\), the xaxis(horizontal axis) consists of data values and the yaxis (vertical axis) consists of frequency points. The frequency points are connected using line segments.
Example \(\PageIndex{2}\).4
In a survey, 40 mothers were asked how many times per week a teenager must be reminded to do his or her chores. The results are shown in Table \(\PageIndex{2}\).6 and in Figure \(\PageIndex{2}\).2.
Number of times teenager is reminded  Frequency 

0  2 
1  5 
2  8 
3  14 
4  7 
5  4 
Exercise \(\PageIndex{4}\)
In a survey, 40 people were asked how many times per year they had their car in the shop for repairs. The results are shown in Table \(\PageIndex{7}\). Construct a line graph.
Number of times in shop  Frequency 

0  7 
1  10 
2  14 
3  9 
Bar graphs consist of bars that are separated from each other. The bars can be rectangles or they can be rectangular boxes (used in threedimensional plots), and they can be vertical or horizontal. The bar graph shown in Example \(\PageIndex{5}\) has age groups represented on the xaxis and proportions on the yaxis.
Exercise \(\PageIndex{1}\)
Add exercises text here.
 Answer

Solution 2.5
Example \(\PageIndex{5}\)
By the end of 2011, Facebook had over 146 million users in the United States. Table \(\PageIndex{2}\).8 shows three age groups, the number of users in each age group, and the proportion (%) of users in each age group. Construct a bar graph using this data.
Age groups  Number of Facebook users  Proportion (%) of Facebook users 

13–25  65,082,280  45% 
26–44  53,300,200  36% 
45–64  27,885,100  19% 
Solution
Exercise \(\PageIndex{5}\)
Add exercises text here.
 Answer

The population in Park City is made up of children, workingage adults, and retirees. Table \(\PageIndex{9}\) shows the three age groups, the number of people in the town from each age group, and the proportion (%) of people in each age group. Construct a bar graph showing the proportions.
Age groups Number of people Proportion of population Children 67,059 19% Workingage adults 152,198 43% Retirees 131,662 38%
Example \(\PageIndex{2}\).6
The columns in Table \(\PageIndex{2}\).10 contain: the race or ethnicity of students in U.S. Public Schools for the class of 2011, percentages for the Advanced Placement examine population for that class, and percentages for the overall student population. Create a bar graph with the student race or ethnicity (qualitative data) on the xaxis, and the Advanced Placement examinee population percentages on the yaxis.
Race/ethnicity  AP examinee population  Overall student population 

1 = Asian, Asian American or Pacific Islander  10.3%  5.7% 
2 = Black or African American  9.0%  14.7% 
3 = Hispanic or Latino  17.0%  17.6% 
4 = American Indian or Alaska Native  0.6%  1.1% 
5 = White  57.1%  59.2% 
6 = Not reported/other  6.0%  1.7% 
 Answer

Solution 2.6
Exercise \(\PageIndex{2}\).6
Add exercises text here.
 Answer

Park city is broken down into six voting districts. The table shows the percent of the total registered voter population that lives in each district as well as the percent total of the entire population that lives in each district. Construct a bar graph that shows the registered voter population by district.
District Registered voter population Overall city population 1 15.5% 19.4% 2 12.2% 15.6% 3 9.8% 9.0% 4 17.4% 18.5% 5 22.8% 20.7% 6 22.3% 16.8% Table \(\PageIndex{2}\).11
Example \(\PageIndex{2}\).7
Below is a twoway table showing the types of pets owned by men and women:
Dogs  Cats  Fish  Total  

Men  4  2  2  8 
Women  4  6  2  12 
Total  8  8  4  20 
Given these data, calculate the conditional distributions for the subpopulation of men who own each pet type.
 Answer

 Men who own dogs = 4/8 = 0.5
 Men who own cats = 2/8 = 0.25
 Men who own fish = 2/8 = 0.25
Note: The sum of all of the conditional distributions must equal one. In this case, 0.5 + 0.25 + 0.25 = 1; therefore, the solution "checks".
Histograms, Frequency Polygons, and Time Series Graphs
For most of the work you do in this book, you will use a histogram to display the data. One advantage of a histogram is that it can readily display large data sets. A rule of thumb is to use a histogram when the data set consists of 100 values or more.
A histogram consists of contiguous (adjoining) boxes. It has both a horizontal axis and a vertical axis. The horizontal axis is labeled with what the data represents (for instance, distance from your home to school). The vertical axis is labeled either frequency or relative frequency (or percent frequency or probability). The graph will have the same shape with either label. The histogram (like the stemplot) can give you the shape of the data, the center, and the spread of the data.
The relative frequency is equal to the frequency for an observed value of the data divided by the total number of data values in the sample.(Remember, frequency is defined as the number of times an answer occurs.) If:
 \(f\) = frequency
 \(n\) = total number of data values (or the sum of the individual frequencies), and
 \(RF\) = relative frequency,
then:
\[\RF=\frac{f}{n}\nonumber]
For example, if three students in Mr. Ahab's English class of 40 students received from 90% to 100%, then, \(f = 3\), \(n = 40\), and \(RF = \frac{f}{n} = \frac{3}{40} = 0.075\). 7.5% of the students received 90–100%. 90–100% are quantitative measures.
To construct a histogram, first decide how many bars or intervals, also called classes, represent the data. Many histograms consist of five to 15 bars or classes for clarity. The number of bars needs to be chosen. Choose a starting point for the first interval to be less than the smallest data value. A convenient starting point is a lower value carried out to one more decimal place than the value with the most decimal places. For example, if the value with the most decimal places is 6.1 and this is the smallest value, a convenient starting point is 6.05 (6.1 – 0.05 = 6.05). We say that 6.05 has more precision. If the value with the most decimal places is 2.23 and the lowest value is 1.5, a convenient starting point is 1.495 (1.5 – 0.005 = 1.495). If the value with the most decimal places is 3.234 and the lowest value is 1.0, a convenient starting point is 0.9995 (1.0 – 0.0005 = 0.9995). If all the data happen to be integers and the smallest value is two, then a convenient starting point is 1.5 (2 – 0.5 = 1.5). Also, when the starting point and other boundaries are carried to one additional decimal place, no data value will fall on a boundary. The next two examples go into detail about how to construct a histogram using continuous data and how to create a histogram using discrete data.
Example \(\PageIndex{2}\).8
The following data are the heights (in inches to the nearest half inch) of 100 male semiprofessional soccer players. The heights are continuous data, since height is measured.
60; 60.5; 61; 61; 61.5
63.5; 63.5; 63.5
64; 64; 64; 64; 64; 64; 64; 64.5; 64.5; 64.5; 64.5; 64.5; 64.5; 64.5; 64.5
66; 66; 66; 66; 66; 66; 66; 66; 66; 66; 66.5; 66.5; 66.5; 66.5; 66.5; 66.5; 66.5; 66.5; 66.5; 66.5; 66.5; 67; 67; 67; 67; 67; 67; 67; 67; 67; 67; 67; 67; 67.5; 67.5; 67.5; 67.5; 67.5; 67.5; 67.5
68; 68; 69; 69; 69; 69; 69; 69; 69; 69; 69; 69; 69.5; 69.5; 69.5; 69.5; 69.5
70; 70; 70; 70; 70; 70; 70.5; 70.5; 70.5; 71; 71; 71
72; 72; 72; 72.5; 72.5; 73; 73.5
74
The smallest data value is 60. Since the data with the most decimal places has one decimal (for instance, 61.5), we want our starting point to have two decimal places. Since the numbers 0.5, 0.05, 0.005, etc. are convenient numbers, use 0.05 and subtract it from 60, the smallest value, for the convenient starting point.
60 – 0.05 = 59.95 which is more precise than, say, 61.5 by one decimal place. The starting point is, then, 59.95.
The largest value is 74, so 74 + 0.05 = 74.05 is the ending value.
Next, calculate the width of each bar or class interval. To calculate this width, subtract the starting point from the ending value and divide by the number of bars (you must choose the number of bars you desire). Suppose you choose eight bars.
\[\frac{74.05−59.95}{8}=1.76\non\nonumber\]
NOTE
We will round up to two and make each bar or class interval two units wide. Rounding up to two is one way to prevent a value from falling on a boundary. Rounding to the next number is often necessary even if it goes against the standard rules of rounding. For this example, using 1.76 as the width would also work. A guideline that is followed by some for the width of a bar or class interval is to take the square root of the number of data values and then round to the nearest whole number, if necessary. For example, if there are 150 values of data, take the square root of 150 and round to 12 bars or intervals.
The boundaries are:
 59.95
 59.95 + 2 = 61.95
 61.95 + 2 = 63.95
 63.95 + 2 = 65.95
 65.95 + 2 = 67.95
 67.95 + 2 = 69.95
 69.95 + 2 = 71.95
 71.95 + 2 = 73.95
 73.95 + 2 = 75.95
The heights 60 through 61.5 inches are in the interval 59.95–61.95. The heights that are 63.5 are in the interval 61.95–63.95. The heights that are 64 through 64.5 are in the interval 63.95–65.95. The heights 66 through 67.5 are in the interval 65.95–67.95. The heights 68 through 69.5 are in the interval 67.95–69.95. The heights 70 through 71 are in the interval 69.95–71.95. The heights 72 through 73.5 are in the interval 71.95–73.95. The height 74 is in the interval 73.95–75.95.
The following histogram displays the heights on the xaxis and relative frequency on the yaxis.
Exercise \(\PageIndex{2}\).8
The following data are the shoe sizes of 50 male students. The sizes are continuous data since shoe size is measured. Construct a histogram and calculate the width of each bar or class interval. Suppose you choose six bars.
9; 9; 9.5; 9.5; 10; 10; 10; 10; 10; 10; 10.5; 10.5; 10.5; 10.5; 10.5; 10.5; 10.5; 10.5
11; 11; 11; 11; 11; 11; 11; 11; 11; 11; 11; 11; 11; 11.5; 11.5; 11.5; 11.5; 11.5; 11.5; 11.5
12; 12; 12; 12; 12; 12; 12; 12.5; 12.5; 12.5; 12.5; 14
Example \(\PageIndex{2}\).9
Create a histogram for the following data: the number of books bought by 50 parttime college students at ABC College. The number of books is discrete data, since books are counted.
1; 1; 1; 1; 1; 1; 1; 1; 1; 1; 1
2; 2; 2; 2; 2; 2; 2; 2; 2; 2
3; 3; 3; 3; 3; 3; 3; 3; 3; 3; 3; 3; 3; 3; 3; 3
4; 4; 4; 4; 4; 4
5; 5; 5; 5; 5
6; 6
Eleven students buy one book. Ten students buy two books. Sixteen students buy three books. Six students buy four books. Five students buy five books. Two students buy six books.
Because the data are integers, subtract 0.5 from 1, the smallest data value and add 0.5 to 6, the largest data value. Then the starting point is 0.5 and the ending value is 6.5.
Next, calculate the width of each bar or class interval. If the data are discrete and there are not too many different values, a width that places the data values in the middle of the bar or class interval is the most convenient. Since the data consist of the numbers 1, 2, 3, 4, 5, 6, and the starting point is 0.5, a width of one places the 1 in the middle of the interval from 0.5 to 1.5, the 2 in the middle of the interval from 1.5 to 2.5, the 3 in the middle of the interval from 2.5 to 3.5, the 4 in the middle of the interval from _______ to _______, the 5 in the middle of the interval from _______ to _______, and the _______ in the middle of the interval from _______ to _______ .
Solution
Calculate the number of bars as follows:
\[\frac{6.5−0.5}{\text{number of bars}}=1\nonumber\]
where 1 is the width of a bar. Therefore, bars = 6.
The following histogram displays the number of books on the xaxis and the frequency on the yaxis.
Example \(\PageIndex{2}\).10
Using this data set, construct a histogram.
Number of hours my classmates spent playing video games on weekends  

9.95  10  2.25  16.75  0 
19.5  22.5  7.5  15  12.75 
5.5  11  10  20.75  17.5 
23  21.9  24  23.75  18 
20  15  22.9  18.8  20.5 
 Answer

Solution 2.10
Some values in this data set fall on boundaries for the class intervals. A value is counted in a class interval if it falls on the left boundary, but not if it falls on the right boundary. Different researchers may set up histograms for the same data in different ways. There is more than one correct way to set up a histogram.
Frequency Polygons
Frequency polygons are analogous to line graphs, and just as line graphs make continuous data visually easy to interpret, so too do frequency polygons.
To construct a frequency polygon, first examine the data and decide on the number of intervals, or class intervals, to use on the xaxis and yaxis. After choosing the appropriate ranges, begin plotting the data points. After all the points are plotted, draw line segments to connect them.
Example \(\PageIndex{2}\).11
A frequency polygon was constructed from the frequency table below.
Lower bound  Upper bound  Frequency  Cumulative frequency 

49.5  59.5  5  5 
59.5  69.5  10  15 
69.5  79.5  30  45 
79.5  89.5  40  85 
89.5  99.5  15  100 
The first label on the xaxis is 44.5. This represents an interval extending from 39.5 to 49.5. Since the lowest test score is 54.5, this interval is used only to allow the graph to touch the xaxis. The point labeled 54.5 represents the next interval, or the first “real” interval from the table, and contains five scores. This reasoning is followed for each of the remaining intervals with the point 104.5 representing the interval from 99.5 to 109.5. Again, this interval contains no data and is only used so that the graph will touch the xaxis. Looking at the graph, we say that this distribution is skewed because one side of the graph does not mirror the other side.
Exercise \(\PageIndex{2}\).11
Construct a frequency polygon of U.S. Presidents’ ages at inauguration shown in Table \(\PageIndex{15}\).
Age at inauguration  Frequency 

41.5–46.5  4 
46.5–51.5  11 
51.5–56.5  14 
56.5–61.5  9 
61.5–66.5  4 
66.5–71.5  2 
Frequency polygons are useful for comparing distributions. This is achieved by overlaying the frequency polygons drawn for different data sets.
Example \(\PageIndex{2}\).12
We will construct an overlay frequency polygon comparing the scores from Example \(\PageIndex{11}\) with the students’ final numeric grade.
Lower bound  Upper bound  Frequency  Cumulative frequency 

49.5  59.5  5  5 
59.5  69.5  10  15 
69.5  79.5  30  45 
79.5  89.5  40  85 
89.5  99.5  15  100 
Lower bound  Upper bound  Frequency  Cumulative frequency 

49.5  59.5  10  10 
59.5  69.5  10  20 
69.5  79.5  30  50 
79.5  89.5  45  95 
89.5  99.5  5  100 
Constructing a Time Series Graph
Suppose that we want to study the temperature range of a region for an entire month. Every day at noon we note the temperature and write this down in a log. A variety of statistical studies could be done with these data. We could find the mean or the median temperature for the month. We could construct a histogram displaying the number of days that temperatures reach a certain range of values. However, all of these methods ignore a portion of the data that we have collected.
One feature of the data that we may want to consider is that of time. Since each date is paired with the temperature reading for the day, we don‘t have to think of the data as being random. We can instead use the times given to impose a chronological order on the data. A graph that recognizes this ordering and displays the changing temperature as the month progresses is called a time series graph.
To construct a time series graph, we must look at both pieces of our paired data set. We start with a standard Cartesian coordinate system. The horizontal axis is used to plot the date or time increments, and the vertical axis is used to plot the values of the variable that we are measuring. By doing this, we make each point on the graph correspond to a date and a measured quantity. The points on the graph are typically connected by straight lines in the order in which they occur.
Example \(\PageIndex{2}\).13
The following data shows the Annual Consumer Price Index, each month, for ten years. Construct a time series graph for the Annual Consumer Price Index data only.
Year  Jan  Feb  Mar  Apr  May  Jun  Jul 

2003  181.7  183.1  184.2  183.8  183.5  183.7  183.9 
2004  185.2  186.2  187.4  188.0  189.1  189.7  189.4 
2005  190.7  191.8  193.3  194.6  194.4  194.5  195.4 
2006  198.3  198.7  199.8  201.5  202.5  202.9  203.5 
2007  202.416  203.499  205.352  206.686  207.949  208.352  208.299 
2008  211.080  211.693  213.528  214.823  216.632  218.815  219.964 
2009  211.143  212.193  212.709  213.240  213.856  215.693  215.351 
2010  216.687  216.741  217.631  218.009  218.178  217.965  218.011 
2011  220.223  221.309  223.467  224.906  225.964  225.722  225.922 
2012  226.665  227.663  229.392  230.085  229.815  229.478  229.104 
Year  Aug  Sep  Oct  Nov  Dec  Annual 

2003  184.6  185.2  185.0  184.5  184.3  184.0 
2004  189.5  189.9  190.9  191.0  190.3  188.9 
2005  196.4  198.8  199.2  197.6  196.8  195.3 
2006  203.9  202.9  201.8  201.5  201.8  201.6 
2007  207.917  208.490  208.936  210.177  210.036  207.342 
2008  219.086  218.783  216.573  212.425  210.228  215.303 
2009  215.834  215.969  216.177  216.330  215.949  214.537 
2010  218.312  218.439  218.711  218.803  219.179  218.056 
2011  226.545  226.889  226.421  226.230  225.672  224.939 
2012  230.379  231.407  231.317  230.221  229.601  229.594 
 Answer

Solution 2.13
Exercise \(\PageIndex{2}\).13
The following table is a portion of a data set from www.worldbank.org. Use the table to construct a time series graph for CO_{2}emissions for the United States.
Year  Ukraine  United Kingdom  United States 

2003  352,259  540,640  5,681,664 
2004  343,121  540,409  5,790,761 
2005  339,029  541,990  5,826,394 
2006  327,797  542,045  5,737,615 
2007  328,357  528,631  5,828,697 
2008  323,657  522,247  5,656,839 
2009  272,176  474,579  5,299,563 
Uses of a Time Series Graph
Time series graphs are important tools in various applications of statistics. When recording values of the same variable over an extended period of time, sometimes it is difficult to discern any trend or pattern. However, once the same data points are displayed graphically, some features jump out. Time series graphs make trends easy to spot.
How NOT to Lie with Statistics
It is important to remember that the very reason we develop a variety of methods to present data is to develop insights into the subject of what the observations represent. We want to get a "sense" of the data. Are the observations all very much alike or are they spread across a wide range of values, are they bunched at one end of the spectrum or are they distributed evenly and so on. We are trying to get a visual picture of the numerical data. Shortly we will develop formal mathematical measures of the data, but our visual graphical presentation can say much. It can, unfortunately, also say much that is distracting, confusing and simply wrong in terms of the impression the visual leaves. Many years ago Darrell Huff wrote the book How to Lie with Statistics. It has been through 25 plus printings and sold more than one and onehalf million copies. His perspective was a harsh one and used many actual examples that were designed to mislead. He wanted to make people aware of such deception, but perhaps more importantly to educate so that others do not make the same errors inadvertently.
Again, the goal is to enlighten with visuals that tell the story of the data. Pie charts have a number of common problems when used to convey the message of the data. Too many pieces of the pie overwhelm the reader. More than perhaps five or six categories ought to give an idea of the relative importance of each piece. This is after all the goal of a pie chart, what subset matters most relative to the others. If there are more components than this then perhaps an alternative approach would be better or perhaps some can be consolidated into an "other" category. Pie charts cannot show changes over time, although we see this attempted all too often. In federal, state, and city finance documents pie charts are often presented to show the components of revenue available to the governing body for appropriation: income tax, sales tax motor vehicle taxes and so on. In and of itself this is interesting information and can be nicely done with a pie chart. The error occurs when two years are set sidebyside. Because the total revenues change year to year, but the size of the pie is fixed, no real information is provided and the relative size of each piece of the pie cannot be meaningfully compared.
Histograms can be very helpful in understanding the data. Properly presented, they can be a quick visual way to present probabilities of different categories by the simple visual of comparing relative areas in each category. Here the error, purposeful or not, is to vary the width of the categories. This of course makes comparison to the other categories impossible. It does embellish the importance of the category with the expanded width because it has a greater area, inappropriately, and thus visually "says" that that category has a higher probability of occurrence.
Time series graphs perhaps are the most abused. A plot of some variable across time should never be presented on axes that change part way across the page either in the vertical or horizontal dimension. Perhaps the time frame is changed from years to months. Perhaps this is to save space or because monthly data was not available for early years. In either case this confounds the presentation and destroys any value of the graph. If this is not done to purposefully confuse the reader, then it certainly is either lazy or sloppy work.
Changing the units of measurement of the axis can smooth out a drop or accentuate one. If you want to show large changes, then measure the variable in small units, penny rather than thousands of dollars. And of course to continue the fraud, be sure that the axis does not begin at zero, zero. If it begins at zero, zero, then it becomes apparent that the axis has been manipulated.
Perhaps you have a client that is concerned with the volatility of the portfolio you manage. An easy way to present the data is to use long time periods on the time series graph. Use months or better, quarters rather than daily or weekly data. If that doesn't get the volatility down then spread the time axis relative to the rate of return or portfolio valuation axis. If you want to show "quick" dramatic growth, then shrink the time axis. Any positive growth will show visually "high" growth rates. Do note that if the growth is negative then this trick will show the portfolio is collapsing at a dramatic rate.
Again, the goal of descriptive statistics is to convey meaningful visuals that tell the story of the data. Purposeful manipulation is fraud and unethical at the worst, but even at its best, making these type of errors will lead to confusion on the part of the analysis.